OKS 1361 Silicone Release Agent 400ml Spray

42,90 zl PLN

Tax includedShipping calculated at checkout

Available Now!

Baza chemiczna: Silikonowa

Cechy szczególne: Dobra wodoodporność, Kompatybilność guma i tworzywa, Wydajność w niskich temperaturach, Wydajność w wysokich temperatur., Właściwości uwalniające do form

Niska temperatura: mniej niż -50°C

Przemysł: Konsumencki, Motoryzacja, Papier i Celuloza

Rodzaj: Aerosol Spray

Wysoka temperatura: +151°C do 200°C

Zastosowanie: Papier i tektura, Prowadnice ślizgowe, Smarowanie gumy i elastomerów, Smarowanie tworzyw sztucznych, Sprężarki, uszczelnienia o-ringi i zawory

OKS 1361 - Spray 400ml Silicone release agent

Colorless release agent and lubricant based on silicone.

Application application-oks-1361

  • Parting agent for casting, injection molding, blow molding and extrusion of plastics and elastomers
  • It prevents the adhesion of e.g. excess adhesives and sealants
  • Eliminates squeaking and squeaking when rubbing surfaces made of plastics, elastomers and metals
  • Facilitates pulling in plastic and rubber profiles, e.g. when installing doors and windows
  • Lubricant for the cutting edges of paper machines, cartoners, veneer and textile machines, etc.
    • industries:
    • Food industry
    • Shipbuilding and marine engineering
    • Construction of machines (machine tools) and devices
    • Processing of rubber and plastics
    • Paper and packaging industry
    • Chemical industry
    • Glass and foundry industry
    • municipal technology
    • Maintenance and upkeep
    • Metallurgical industry
    • Logistics
    • Railway technology

Features and benefits features-and-advantages-oks-1361

  • NSF H1 Registration
  • High efficiency due to above-average wetting
  • surface and creating separating membranes with properties
  • Versatile for long-term lubrication, protection, care and impregnation of metal, plastic and rubber material surfaces
  • Minimal consumption due to the formation of extremely thin films
  • Water and weather resistance
  • Long spray tube for precise application
  • Does not contain MOSH/MOAH ( long-chain impurities and aromatic hydrocarbons contained in mineral oil)

Technical parameters

Standard Condition unit Value
base oil Polydimethylsiloxane
Technical data
Viscosity (at 25°C) DIN 51 562-1 mm²/sec 350
Solidification temperature DIN ISO 3016 3°C steps °C -55
Flash-point DIN ISO 2592 > 79 °C > 300
Lower operating temperature °C -50
Upper operating temperature °C 200
Color colorless
Density (at 20°C) DIN EN ISO 3838 g/cm³ 0.97
Approval for use in food technology NSF H1, Reg.-No. 129481


Surfaces must be cleaned for optimal performance. Spray evenly thin layer. Avoid excesses.

Note: Only mix with suitable lubricants. Silicone-based plastics, such as silicone rubber, can be separated by silicone oil. Silicone must not be used for sliding areas under pure oxygen.