Shell OMALA S2 GX - Oil for gears and planetary gears

583,41 zl PLN

Tax includedShipping calculated at checkout

Only 4 left!

Baza chemiczna: Olej mineralny

Cechy szczególne: Dobra odporność na utlenianie, Wysoka nośność duże obciążenia

Typ produktu: Olej przekładniowy

Zastosowanie: Napędy śrubowe, Przekładnie, Przekładnie i Koła zębate



Shell OMALA S2 GX 150
Shell Omala S2 GX 100
Shell Omala S2 GX 1000
Shell Omala S2 GX 220
Shell Omala S2 GX 320
Shell Omala S2 GX 460
Shell Omala S2 GX 68
Shell Omala S2 GX 680

Industrial Gear Oils

Industrial gear oil

Shell Omala S2 GX is a high performance EP anti-seize gear oil designed for use in heavy duty industrial gears. Excellent load-carrying properties, micropitting protection and seal compatibility ensure excellent performance of closed gears.



  • Closed industrial gear systems
    The technology used in Omala S2 GX oils provides effective anti-seize protection. The oil is intended for use in closed industrial gears: toothed, helical and planetary, including heavily loaded systems lubricated by circulation or by means of a forced oil circulation. Omala S2 GX oils can also be used in splash or circulating lubricated systems with bearings in which there is direct contact of metal elements, and they are not equipped with gears.
  • Other uses
    Shell offers a wide range of products for other specific transmission applications
    • When the use of synthetic oils is recommended or very long oil change intervals are required or there are large temperature fluctuations, we recommend the use of Omala S4 GXV oil.
    • Shell Omala S5 Wind 320 is recommended for wind turbine gearbox drives.
    • The use of oils is recommended for worm gears
      Shell Omala S4 WE, Shell Morlina S4 B or Shell Omala S1 W.
    • Shell Spirax products should be used for vehicle transmissions
    • For geared systems or other applications where filters below 10 microns are used, consult your local Shell technical representative before using Shell Omala S2 GX.

    Features and benefits

    • Long oil life due to oxidation stability and
      temperature resistance - lower maintenance costs
      Shell Omala S2 GX provides high thermal and chemical resistance throughout the recommended replacement interval. The product is resistant to high temperatures and deposit formation, providing extended oil life, even at oil temperatures of up to 1000 ° C in some applications.
    • Excellent protection against wear and micropitting
      Shell Omala S2 GX provides excellent load carrying capacity and micropitting protection for long equipment life.
    • Maintain transmission system performance with optimized water separation capacity and reduced corrosion and foaming
      Shell Omala S2 GX exhibits excellent water separation, corrosion protection and low foam formation. Water reduces the fatigue resistance of bearing and gear surfaces and causes corrosion on the internal surfaces. Corrosion protection is maintained even when contaminated with seawater and solids.
      Reduced risk of foaming which often occurs in applications where the residence time of the oil in the reservoir is very short. Excellent shear stability ensures viscosity is maintained throughout the drain interval. Compatibility with common seals and protective coatings further enhances equipment performance and helps prevent leaks. Shell Omala S2 GX is compatible with most paints.

    Technical parameters

    Shell Omala S2 GX 68 100 150 220 320 460 680
    Viscosity class ISO 3448 68 100 150 220 320 460 680
    kinematic viscosity [mm2/s] ISO 3104
    at 40 [°C] 68 100 150
    220 320 460 680
    at 100 [°C] 8.7 11.4 15
    19.4 25 30.8 40
    Viscosity index ISO 2909 100 99 98
    98 98 97 105
    COC flash point [°C] ISO 2592 >230 >2 3 0 >230
    >24 0 >25 0 >25 0 >2 5 0
    Pour point [°C] ISO 3016 -27 -24 -24 -18 -15 -12 -9
    Density at 15 [°C] [kg/m3] ISO 12185 885 891 891
    899 903 904 912

    Specifications and approvals (meets requirements)

    • ISO 12925-1 Type CKD (ISO 150)
    • ISO 12925-1 Type CKC (ISO 150)
    • DIN 51517- CLP Part 3 (ISO 150)
    • AGMA EP 9005-F16 (ISO 150)
    • AIST (US Steel) 224 (ISO 150)
    • Fives Cincinnati: P-77 (ISO 150)

    Approved or recommended by:

    • Flender - Flender T 7300 Approved Shell Omala S2 GX 150 is approved by Flender for use in bevel, helical and planetary gearboxes and marine applications.

    Work safety and environmental protection

    The product does not pose a direct threat to health during its correct use in accordance with its intended purpose and with personal and industrial hygiene. Avoid skin contact. Use protective gloves. In case of skin contact, wash off the oil with soap and water.

    Environmental Protection
    Used oil should be handed over to an authorized and licensed waste disposal company.
    Do not pour into the soil, surface waters or drains.