OKS 235 Aluminum anti-seize paste 250g

159,00 zl PLN

Tax includedShipping calculated at checkout

Only 65 left!

Baza chemiczna: Olej mineralny

Cechy szczególne: Dobra ochrona przed korozją, Dobra odporność chemiczna, Dobra wodoodporność, Odporny na wysokie temperatury, Wysoka odporność na zużycie

Konsystencja NLGI: NLGI 1

Niska temperatura: od 0°C do -30°C

Przemysł: Chemia i Petrochemia, Energetyczny, Górnictwo, Konserwacja, Konsumencki, Motoryzacja, Obróbka i produkcja metali, Przemysł ciężki

Skład Ciała Stałe: Aluminium

Wysoka temperatura: +1000°C i więcej, +100°C do 130°C

Zastosowanie: Gwinty, Gwinty i połączenia gwintowane, Prowadnice ślizgowe, Zawiasy, Łożyska ślizgowe

OKS 235 Aluminum anti-seize paste 250g

Paste for the assembly of screw and bolt connections exposed to high temperatures and corrosive influences.


Application

application-oks-235
  • Assembly lubrication of machine elements exposed to high temperatures,
  • screw connections, fittings, flange and plug-in connections, guides, sliding and sealing surfaces of furnaces, boilers, burners, motors
  • Release paste
    • industries:
    • Glass and foundry industry
    • Railway technology
    • Construction of machines (machine tools) and devices
    • Paper and packaging industry
    • Shipbuilding and marine engineering
    • Logistics
    • Metallurgical industry
    • Processing of rubber and plastics
    • municipal technology
    • Chemical industry


Features and benefits

  • The best anti-seize and seize properties
  • High efficiency due to excellent release action and pressure absorption
  • Good protection against splash water and condensation
  • It does not contain heavy metal compounds
  • Good corrosion protection
  • Very good water resistance
  • Wide operating temperature range
  • Optimum ratio between tightening torque and achievable tension
  • Also available in spray version OKS 2351

Technical parameters

Standard Condition unit Value
Composition
base oil Mineral oil
Thickening agents organic/inorganic
Solid lubricants aluminum powder
Solid lubricants Other solid lubricants
Application technique data
Dropping point DIN ISO 2176 °C 110
Consistency DIN 51 818 DIN ISO 2137 NLGI Grade 0-1
Resting Penetration DIN ISO 2137 without shear load 0.1mm 290-330
Oil separation DIN 51 817 7d/40°C wt.% < 4.0
Lower operating temperature °C -thirty
Upper operating temperature Lubrication °C 110
Upper operating temperature Separation °C 1.100
Color silver
Density (at 20°C) DIN EN ISO 3838 g/cm³ 0.92
Salt fog resistance test DIN EN ISO 9227 Layer thickness 30 µm h > 400
Thread friction coefficient (μ total) DIN EN ISO 16 047 Screw ISO 4017 M10x55-8.8 anti-reflective black, nut ISO 4032 M10-10 anti-reflective black 0.13
Breaking moment DIN 267-27 M10 A2, 40 Nm, 400 °C, 100 h nm < 2.7 x tightening torque


Available packages:

250 ml Brush Can, 1 kg Container, 5 kg Hobok, 25 kg Hobok

Usage

For optimum adhesion, first clean the threads and sliding surfaces of dirt and other lubricants, preferably mechanically (e.g. with a wire brush) and then with OKS 2610/OKS 2611 Universal Cleaner.

Apply a sufficient amount of OKS 235 evenly with a brush, spatula, etc. to the contact point of the head/nut and the thread. Do not use paste instead of grease and only mix with suitable lubricants.