WEICON Flex 310 M Liquid polymer adhesive with ISEGA approval

88,11 zl PLN 110,14 zl PLN Save 22,03 zl PLN

Tax includedShipping calculated at checkout

Only 6 left!

Białe
Czarny
Szary

Atest: ISEGA dopuszczenie do kontaktu z żywnością

Baza chemiczna: Polioksylopropylen

Cechy szczególne: Klej/uszczelniacz jednoskładnikowy

Typ produktu: Silikon

Zastosowanie: Kleje, Powłoki, Silikon

WEICON Flex 310 M® Classic MS-polymer

Self-leveling, one-component casting and coating compound based on polyoxypropylene.

ISEGA certificate

Flexible adhesive based on MS polymers for versatile use, ISEGA certificate

WEICON Flex 310 M® Classic is a strong, paintable (wet) elastic adhesive with very good resistance to aging and UV radiation, fresh and salt water. Does not contain silicones, isocyanates, halogens or solvents.

The product is ISEGA approved for use as an adhesive in the sector
food processing.

Flex 310 M® Classic is a flexible adhesive based on MS polymers and intended for joining metals, many materials, ceramics, glass and stone. It can be used in the construction of containers and devices, containers, bodies and vehicles, structures
ships, yachts and boats, air conditioning and ventilation systems, energy and electrical industries and everywhere where silicones are not used.

weicon-flex-310M-Classic-POLYMER

Application:

  • Normal conditions: +23°C, relative air humidity 50%
  • for joining metals
  • for joining many materials
  • for joining ceramics
  • for joining glass and stone
  • construction of containers
  • container construction
  • construction of vehicles, ships, yachts, boats. air conditioning and ventilation

Features and Advantages:

  • very good resistance to aging
  • good resistance to UV radiation, fresh and salt water
  • Does not contain silicones, isocyanates, halogens or solvents
  • ISEGA approval

Technical data

Base 1 K.-Polyoxylpropylene
Density
1.44 g/cm³
Viscosity Paste
Stability, lapse (ASTM D 2202) 1mm
Application temperature +5 to +40 °C
Hardening type Cured with ambient moisture
Uncuring conditions and thermal resistance +5 to +40°C and 30% to 95% air humidity
Formation of the epidermis
25 min
Curing speed (first 24 h) 2 - 3 mm
Volume change (DIN 52451) -1%
Minimal gap 5mm
Maximum gap 25mm
Shelf life (+5°C to +25°C / +41°F to +77°F) 12 months
Shore A hardness (DIN 53505 / ASTM D 2240) ± 5 42
Breaking elongation (DIN 53504 / ASTM D 412) 650%
Tensile strength 3.3 N/mm²
Medium shear strength (DIN EN 1465/ASTM D 1002) 2.1 N/mm²
Tg room temperature -55°C
Specific resistance > 10^10 Ohm/cm
Tear strength (DIN 53515/ASTM D 1002) 20 N/mm²
Maximum allowable deformation 15%
For painting "wet" within 3 hours at the latest
Building material category (DIN 4102) B2
Thermal resistance -40 to +90 short-term Up to +130 °C
ISSA-Code 75.634.30/31/32
IMPA-Code 815271/72/73


Application method:

Surfaces must be clean and free of grease. Many surface contaminants such as oil, grease, dust and dirt can be removed with WEICON Surface Cleaner. For dirty metal surfaces, we recommend WEICON Spray Cleaner S; WEICON Sealant and Adhesive Remover is suitable for removing old paint or adhesive residues. Most materials can be easily combined with each other and with each other. For certain materials or extreme requirements, we recommend using a primer (WEICON Primer). Mechanical surface treatment (e.g. by grinding or sandblasting) can significantly improve the adhesion of the adhesive.

Cartridge Gun, pneumatic gun for applying glue (310 ml cartridges), compressed air gun, we recommend the version with a piston (WEICON Pneumatic dispensing gun), automatic dosing systems.

Available packaging:

Colors: White, Black and Gray

13303200 Flex 310 M ® Classic MS-polymer, 200 ml, white
13303310 Flex 310 M ® Classic MS-polymer, 310 ml, white
13304200 Flex 310 M ® Classic MS-polymer, 200 ml, black
13304310 Flex 310 M ® Classic MS-polymer, 310 ml, black
13305200 Flex 310 M ® Classic MS-polymer, 200 ml, gray
13305310 Flex 310 M ® Classic MS-polymer, 310 ml, gray