WEICON Anti-Seize Nickel
Anti-Seize Nickel Paste
Paste designed to withstand the toughest working conditions. It has high adhesion, does not absorb water, is resistant to fresh, salt, hot water and steam. High nickel content provides protection against corrosion and aggressive substances contained in diluted acids, e.g. salt, sulfur and nitrogen. Anti-Seize Nickel paste can be used in a wide range of temperatures from -30°C to +1,450°C.
Anti-Seize Nickel is used as a corrosion protection and high-quality assembly grease for statically and dynamically heavily loaded screw connections as well as other components and low-speed systems operating at high temperatures. The paste protects against corrosion, scuffing, abrasive wear, stick-slip effect, oxidation, fretting corrosion and electrolytic reactions, so-called cold welding. It is used in seals, valves, screw connections, gear wheels, bearings, transmission belts, pins, tools, etc.
Application:
- In the most difficult working conditions, including: extreme temperatures and acids
Features and Benefits:
- High grip
- It does not accept water
- Resistant to fresh, salt, hot water and steam
- High nickel content
- Corrosion protection
- Protection against aggressive substances contained in diluted acids, e.g. salt, sulfur and nitrogen
- wide temperature range from -30°C to +1,450°C.
Technical data
Base | Synthetic oil |
Color | anthrazite |
Viscosity at +25 °C (DIN 51757) | 1.3 g/cm³ |
Coefficient of friction | 0.16 |
Coefficient of friction - total | 0.15µ |
Coefficient of friction - thread | 0.14µ |
Coefficient of friction - reversed | 0.16µ |
VKA-TEST (DIN 51350) working load | - |
VKA-TEST (DIN 51350) welding force | 2000N |
VKA-TEST (DIN 51350) flaw (1 Min/1000N) | 0.6mm |
Worked Penetration (DIN ISO 2137) | 310 - 340 1/10mm |
Specific Thermal Ability (20°C) | 1.493 J/(g K) |
Thermal resistance (20°C) | 0.303mm²/sec |
Thermal conductivity (ISO 22007-4) (20 °C) | 0.582 W/m K |
Dielectric strength (DIN EN 60243-1) at 20°C | 1.1kV/mm |
Sulfur content (DIN 51400) | <0.1% |
Water resistance (DIN 51807) | 1 - 90 |
pressure load | 230N/mm² |
Shelf life | 24 months |
The viscosity of the mixture | - |
brine test | > 170 hours |
Specific resistance | - |
Thermal resistance | -30 to 1,450 °C |
ISSA code | - |
IMPA code | - |
Application method:
Degrease and clean the surfaces Apply the assembly paste evenly AS does not replace lubrication with oil or grease.
Apply the assembly paste evenly with a brush, brush, cloth or sponge. In the case of screws, it is important that the paste is applied all the way to the base of the thread to achieve a good sealing effect. Assembly paste should not be mixed with oil and should be mixed with oils or greases. Assembly paste does not replace grease or oil.
Attention:
When using WEICON products, please observe the physical, safety, toxicological and ecological data and regulations in our safety data sheets (www.weicon.de).
Available packages:
[ 120 g ][ 400 g ][ 450 g ][ 500 g ][ 1 kg ][ 5 kg ][ 10 kg ][ 20 kg ][ 1.8 kg ]
Product title
Vendor
19,99 zl PLN | 24,99 zl PLN
Product title
Vendor
19,99 zl PLN | 24,99 zl PLN
Product title
Vendor
19,99 zl PLN | 24,99 zl PLN
Product title
Vendor