Weicon Anti-Seize high-tech assembly paste with approval

87,04 zl PLN

Tax includedShipping calculated at checkout

Only 4 left!

Atest: NSF H1 spożywczy do kontaktu z żywnością

Cechy szczególne: Dobra ochrona przed korozją, Dobra wodoodporność, Dobra wytrzymałość dielektryczna, Wydajność w wysokich temperatur.

Niska temperatura: od 0°C do -30°C

Wysoka temperatura: +1000°C i więcej

NSF-approved assembly pastes

Anti-Seize "High-Tech" has high thermal resistance and excellent separating properties, does not contain metals, is neutral to materials and is NSF certified. Anti-Seize "High-Tech" is particularly recommended in applications where
where metal-containing preparations can cause electrolytic reactions, extreme thermal resistance, a certificate for contact with food and an aesthetic color of the preparation are required.

Application:

  • In applications where metal-containing preparations may cause electrolytic reactions

Features and Benefits:

  • Durable corrosion protection
  • High thermal resistance
  • Contains no metals
  • Material neutral
  • NSF Approved
  • Aesthetics
  • Without silicone

Technical data

Base Medical grade white oil
Color white
Viscosity at +25 °C (DIN 51757) 1.42g/cm³
Coefficient of friction 0.10-0.13
Coefficient of friction - total 0.13µ
Coefficient of friction - thread 0.11µ
Coefficient of friction - reversed 0.14µ
VKA-TEST (DIN 51350) working load 3.600N
VKA-TEST (DIN 51350) welding force 3.800N
VKA-TEST (DIN 51350) flaw (1 Min/1000N) 0.7mm
Worked Penetration (DIN ISO 2137) 310 - 340 1/10mm
Specific Thermal Ability (20°C) 1.574 J/(g K)
Thermal resistance (20°C) 0.302mm²/sec
Thermal conductivity (ISO 22007-4) (20 °C) 0.675 W/m K
Dielectric strength (DIN EN 60243-1) at 20°C 6.3kV/mm
Sulfur content (DIN 51400) <0.1%
Water resistance (DIN 51807) 1 - 90
pressure load 230N/mm²
Shelf life 24 months
The viscosity of the mixture -
brine test > 170 hours
Specific resistance 1.0 x 10^15 Ohms/cm
Thermal resistance -40 to +1,400 °C
ISSA code 53.402.81/... /89
IMPA code 450882/ ... /87

Application method:

Depending on the degree of contamination, first clean the lubricated surface with WEICON Cleaner S. Treat the screws used mechanically with a wire brush and clean them with WEICON Cleaner S.

Apply the assembly paste evenly with a brush, brush, cloth or sponge. In the case of screws, it is important that the paste is applied all the way to the base of the thread to achieve a good sealing effect. Assembly pastes should not be mixed with oils or greases. Assembly paste does not replace grease or oil.

Attention:

When using WEICON products, please observe the physical, safety, toxicological and ecological data and regulations in our safety data sheets (www.weicon.de).

Available packages:

[ 30 g ][ 85 g ][ 120 g ][ 200 ml ][ 400 g ][ 450 g ][ 500 g ][ 1 kg ][ 5 kg ][ 10 kg ][ 20 kg ][ 1.8 kg ]