Molykote D-7409 Hot curing coating - 25kg

Molykote D-7409 Hot curing coating - 25kg

14.136,75 zl PLN

Tax includedShipping calculated at checkout

Sold Out

Baza chemiczna: Spoiwo Organiczne

Cechy szczególne: Dobra ochrona przed korozją, Dobre zapobieganie frettingowi, Wydajność w niskich temperaturach, Wydajność w wysokich temperatur., Wysoka nośność duże obciążenia

Nazwa kategorii: Powłoki Przeciwcierne

Niska temperatura: mniej niż -50°C

Pojemność opakowania: 25kg

Przemysł: Motoryzacja, Obróbka i produkcja metali, Przemysł ciężki, Transport

Skład Ciała Stałe: Grafit, MoS2 dwusiarczek molibdenu

Wysoka temperatura: +250°C do 300°C

Zastosowanie: Gwinty i połączenia gwintowane, Montaż i docieranie, Podwozie, Pompy, Powłoki, Prowadnice ślizgowe, Próżnia, Łańcuchy

Customers rate us 5.0/5 based on 101 reviews.

MOLYKOTE® D-7409 Anti-friction coating

Dry Heat-curing grease

Key properties

Heat-curing anti-friction coating filled with molybdenum disulfide and graphite, higher load capacity due to resin selection.

Apps

For metal/metal joints with slow to moderately fast movements and medium to heavy loads. Suitable for heavily loaded sliding areas with low sliding speeds, oscillating movements or intermittent work. For permanent lubrication at high temperatures and where oils and greases cannot be used. Used successfully on piston rings and tappets of combustion engines, magnetic armatures of vehicle starters, elements of bonnet locks.

  • Activation
  • closures
  • Shell
  • Gears, gearboxes and pumps
  • Vibration isolation from noise
  • Sliding bearings, bushings and bushings
  • Power screw drives
  • Guides and sliding tracks
  • Spring clamps
  • Threaded connections fasteners

Performance benefits

  • Excellent lubrication combined with anti-corrosion properties
  • High load capacity
  • High wear resistance
  • High temperature resistance
  • Resistant to oils, greases, solvents
  • Avoid fretting corrosion
  • Good chemical resistance
  • Good corrosion protection
  • Good fretting protection
  • Performance at low temperatures

Product Details

Product type Anti-friction coatings
Technology Organic binder, solids, solvent
Solid lubricants MoS2, graphite
Curing temperature (C) 220
Low Temperature (C) -70
high temperature (C) 300
Color gray black


Usage

Surface preparation

Carefully clean and degrease the surface to be covered with the Anti-Slip Coating.

Recommended pre-treatments: phosphating or sandblasting (180 grit); both pre-treatments enhance the durability and life of the Coating.

How to apply

Stir the Anti-Corrosion Coating thoroughly before and during use, apply by spraying (3 to 5 bar [45 to 75 psi] air pressure), dipping, spinning or brushing. The surfaces should be covered as evenly as possible.

Recommended dry film thickness: 3 to 20 μm.

The product applied in this way should be cured at a temperature of 150-220°C.

Coverage

When applied to a 10 μm dry film, the thickness of Molykote ® D-7409 Anti-friction Coating has an average coverage of 16 m2 / kg (this value does not take into account the losses generated during the application process).

Thinning

The recommended thinner is Molykote® 7415.

Hardening

Typical curing conditions are: 30 minutes at 220°C