HARD Wax Chain lubricant 100ml

Name: HARD Wax Chain lubricant 100ml
Brand: EVIL LUBRICANTS
SKU: 0101221
Price: 59.0 PLN
Availability: InStock

59,00 zl PLN Save -59,00 zl PLN

Tax includedShipping calculated at checkout

Available Now!

Cechy szczególne: Mokre warunki uniwersalny, Suche warunki uniwersalny, Uniwersalny zmienne warunki, Woskowa baza WAX

Pojemność opakowania: 100ml

Zastosowanie: Łańcuchy

Description Tags: hard wax for the chain, wax with teflon, drop wax, red wax, pink wax, wax with teflon for the chain, good bicycle chain lubricant, mtb bicycle chain lubricant, mtb bicycle chain lubrication, bicycle lubricant road bike, mountain bike grease, ceramic wax, hybrid chain wax, PTFE wax.

HARD Wax Chain lubricant 100ml

Liquid ceramic wax that, when released, hardens upon contact with air. Product packaged by eLUBE by ABS Serwis

Chains waxed with Hard Wax grease are extremely resistant to contamination. Thanks to this, the chain and driveline run cleanly and for a long time, especially in difficult conditions.

The waxes used in the composition are a special formula of paraffin, PTFE and a solid lubricant. Paraffin is a carrier and barrier - it carries PTFE and ceramic lubricating particles.

This hybrid wax composition provides long-term lubrication and protects the chain from excessive damage.

Features and Benefits

improved additive lubrication
wear of drive parts is reduced
ease in the waxing process (liquid droplet application)
protection of the chain against dust and dirt adhesion
it is suitable for any weather, even in rain and moisture
reduces drive noise
the world's only flexible formula for chain wax without melting

Application

Hard Wax grease recommended for MTB, triathlon, gravel, racing and e-bike chains operating in wet and dry conditions. When riding in rain/wet conditions, the chain should be re-waxed after prolonged contact with water.

Properties of Hard WAX grease

Standard	Contents	Unit	Result
CTM0176	color	Pink-red
Composition: several types of hard waxes, corrosion inhibitor, emulsifier thickening liquid wax, PTFE nanoparticles and red solid lubricant
DIN 51 757	Density at 20°C	g/ml	0.78
DIN 51 562	Wax viscosity (mixed at 0°C)	cSt	320
DIN 51 562	Wax viscosity (mixed at .35°C)	cSt	20
	Recommended temperature range for application	°C	5 to 43
	The temperature at which hardened wax melts	°C	65
	The temperature of the water washing off the hardened wax	°C	70
DIN 51 350 pt.4	Weld load	n	1000
DIN 51 350 pt.5	load capacity mm	mm	0.6
	Flash point, °C -> 200	°C	> -10
	temperature of self-ignition	°C	around 300
	Total drying time	hours	4-6

Usage:

Clean the chain
Prepare Hard WAX before application
It is necessary to heat the wax bottle to a temperature of about 50 degrees (water bath) so that the product becomes completely liquid
Apply the lubricant dropwise (remember to mix thoroughly by shaking the bottle) along the entire length of the chain with a new layer of wax lubricant.
After lubrication, turn the drive system several times
Remove excess liquid wax with a dry cloth
Leave the chain for 4 to 6 hours for the wax to fully cure.
After this time, you can turn the drive system one more time and remove excess hard wax.