WET LUBE Wet condition bike chain lubricant 100ml EVIL Lubricants

52,00 zl PLN

Tax includedShipping calculated at checkout

Only 70 left!

Baza chemiczna: Syntetyczna PAO Polialfaolefina

Cechy szczególne: Mokre warunki uniwersalny

Pojemność opakowania: 100ml

Zastosowanie: Łańcuchy

WET LUBE - EVIL Lubricants

Wet weather chain oil

WET Lube is a high-tech synthetic bicycle chain lubricant, specially developed for mountain bikers and competitors riding in the rain. However, it can also be successfully used for all kinds of amateur trips in wet weather conditions.

wet-lube evil-lubricants chain oil

WETLUBE's advanced hybrid technology gives the oil very good chain link penetration and resistance to washout, its tackifiers improve adhesion to metal without causing oil scum, it does not collect dirt or dust. WETLUBE has many additives that reduce wear and increase antioxidant properties.

WETLUBE hybrid series chain lubricant is a new product for the chain, its low coefficient of friction causes lower energy consumption. Tests confirm that thanks to the use of the product for the chain, power losses are reduced by several to a dozen percent!!

The frequency of lubrication with WET Lube depends on the intensity of riding, weather conditions and accuracy of application. It is also recommended to change the lubricant regularly and chemically clean the chain to maintain its efficiency.

The suggested method for lubricating a bicycle chain with WET Lube oil is as follows: first, remove the old grease physically and chemically, then apply one drop of grease to each roller from the inside. After soaking the rollers, pedal for about 10-30 seconds to evenly distribute the grease, then wipe off the excess with a dry cloth. It is important that the pins and inner rollers are well lubricated.

How to use WET LUBE for your chain:

  1. Remove old grease from the chain
  2. Apply eLUBE grease using the dropper provided to each chain link.
  3. Wait a moment for the grease to absorb.
  4. Wipe excess grease from the chain with a dry cloth

Attention! - Shake before use.

Basic data of Wet Lube bicycle chain lubricant

Standard Contents Unit Contents
CTM0176 Color Green-transparent
Composition: base oil synthetic-polyester-diester mixture, PTFE, corrosion and oxidation inhibitors, additives increasing strength and load, solid lubricants.
Recommended operating temperature ° C -20 to +125
DIN51757 Density at 15 ° C g / cm3 0.98
DIN51562 Kinematic viscosity of base oil at 40°C mm2/s 200
ASTM D-92 Flash point (closed cup) ° C > 240
Evaporation loss (24 h, 200 ° C) % of mass <2
Oxidation resistance (test 4 hours at 200 ° C and 200 ml / min oxygen) % of mass <5
ASTM D-4172 Load capacity (Four Ball friction test, 1200 rpm/392 N/75 ° C/1 h) mm <0.35
ASTM D-2783 (Four-ball method), Weld load N 2400

Packaging: 10ml,100ml

Shelf life and storage: When stored at temperatures below 20 °C in original containers, the product has a shelf life of 60 months from the date of production.

Recommended for: wet weather performance road riding, BMX performance, cyclocross, winter cycling, riding in humid climates, long-term bicycle storage, mountain biking, bike touring, bike marathon, travel

Best Wet Condition Lubricant, Bike Chain Oil for Rain, Chain Oil for Wet Conditions, Chain Oil for Rain, Wet Condition Oil for Bike Chain, Chain Lubricant for Rain, Rain Lubricant for Cycling, Rain and Mud Lubricant, Bike Chain Lubrication in Rain, Synthetic Rain Oil for Bike Chain

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
D
Daniel Podziewski

POLECAM