INSTA-STIK MP FC GUN 750ml Mounting foam adhesive

Name: INSTA-STIK MP FC GUN 750ml Mounting foam adhesive
Brand: Dow
SKU: 4019803067086
Price: 39.83 PLN
Availability: InStock

39,83 zl PLN Save -39,83 zl PLN

Tax includedShipping calculated at checkout

Only 88 left!

Cechy szczególne: Dobra przyczepność do wielu podłoży, Klej/uszczelniacz jednoskładnikowy

Niska temperatura: od 0°C do -30°C

Typ produktu: Klej poliuretanowy

Wysoka temperatura: +151°C do 200°C

Zastosowanie: Wielozadaniowe

INSTA-STIK MP FC Multipurpose Fast Cure GUN ADHESIVE 750ml

Adhesive based on polyurethane foam for building materials

Professional foam adhesive for use with various types of insulation or rigid boards for concrete, masonry, plaster, wood, metal and various bitumen substrates

A one component polyurethane foam sealant that cures quickly and has low expansion, can be applied both horizontally to floors and vertically to walls.

Application:

for building materials
for polystyrene, extruded and expanded polystyrene
for polyurethane,
for mineral wool
plasterboard
for concrete, masonry, plaster, wood, metal
for various bitumen substrates.
for fixing white expanded polystyrene (EPS) and extruded polystyrene (XPS) boards to mineral substrates (e.g. concrete, ceramic) when insulating buildings with the jointless method (ETICS). Extruded polystyrene (XPS) boards should also be fastened mechanically.

Features and Benefits:

fast setting
good adhesion to many building materials
can also be used on damp surfaces
extremely low expansion
high performance
does not contain solvents and freon
can be used in harsh weather conditions

Typical Properties

Property	unit	Value
Color		light yellow
Cutting time EN17333-3 M1	min.	20
Time to reach skin EN17333-3 M2	min.	5
Yield (gluing surface)	m2	around 15
Density	kg/m3	18
temp. application	°C	+0 to +35
Thermal resistance	°C	-30 to +150
Tensile strength EN17333-4 M5	kPa	≥80
Fire resistance DIN 4102-1	-	B2

Durability and Storage

Shelf life: 18 months When stored in an upright position and in dry conditions. Protect the product and accessories from direct sunlight.
Storage temperature: +5°C to +25°C

How to use

Substrate preparation

Surfaces prior to foam spraying must be dry, sound, clean and free of dust, grease or loose particles. The foam adheres well to most commonly used construction materials, such as wood, concrete,
plaster, drywall, metal, mineral wool, EPS, XPS, PUR and
PIR foams. The exceptions are polyethylene or other polyolefin films and surfaces contaminated with silicone, oil or grease.

Method of application

Shake the can vigorously at least 20 times.
Screw the straw onto the valve. NOTE: Do not use excessive force to avoid damage.
To extrude the foam, make sure the can is in an upright position with the valve down, carefully press the trigger against the straw.
The applied amount can be dispensed with the trigger.
The foam expands, be careful not to overfill the gap