dowsil firestop 700 uszczelniacz ognioodporny

dowsil firestop uszczelniacz ognioodporny

Dowsil FIRESTOP 700 fireproof sealant

Name: Dowsil FIRESTOP 700 fireproof sealant
Brand: Dow
Price: 79.02 PLN
Availability: OutOfStock

79,02 zl PLN Save -79,02 zl PLN

Tax includedShipping calculated at checkout

Sold Out

Color: Black

Cechy szczególne: Dobra przyczepność do wielu podłoży, Klej/uszczelniacz jednoskładnikowy, Utwardzanie Alkoxy (Neutralny)), Wydajność w niskich temperaturach, Wydajność w wysokich temperatur.

Niska temperatura: od -31°C do -50°C

Norma: EN 1366-4

Pojemność opakowania: 310ml

Wysoka temperatura: +151°C do 200°C

Dowsil™ FIRESTOP 700 Fire Stop Sealant - 310ml

A fire retardant one component neutral curing silicone sealant that provides excellent primerless adhesion to a range of common construction substrates including steel, masonry and brick.

Application:

Line expansion joints in fire walls
Minor penetration seals where pipes or cables pass through fire resistant structures
Horizontal and vertical linear joints and sealing of passages in walls

Specifications DOWSIL™ FIRESTOP 700(CN) Sealant complies with:

GB23864-2009 A3
GB/T14683-2017
BS EN 12101: Part 1: 2005 + A1 2006

Features and Benefits:

Up to four hours of fire resistance
Neutral cure with joint movement ± 50%
Excellent weather resistance, including resistance to ozone, UV radiation and extreme temperatures
Long service life
easy to apply
Complies with ISO 11600-F and G25LM
CE mark as a fire retardant sealant according to EAD 350141-00-1106
Tested and classified according to EN 1366-4 and 13501-2 (connector design details on request)

Adhesion to

Anodised aluminium, Brick, Fluorocarbon coated aluminium, GRP/GRC, Heat strengthened glass, Lightweight stone panels, Low-E coated glass, Natural stone, Polyester powder coated aluminium/Steel, Wood

Typical Properties

Test	Property	Unit	Result
ASTM1D2202	Flow/Sag	mm	Max.1
WZT20097B	Density	g/cm3	1.48
WZT98B	Machining working time	minutes	15
ASTMC679	Non-adhesive time(23°C,50%right)	hours	1.5
WZT663A	Cure Index(23°C,50%Right)	mm	After 1 day: 2
ISO38339	Tensile strength	MPa	0.57
ISO8339	Elongation at break	%	345
ISO8339	100% module	MPa	0.39
ISO9047	The ability to move the connection	%	±50
ASTMD2240	Hardness, Durometer	Shore A	26
	application temperature	°C	+5 to +40
	Working temperature	°C	-50 to +180
W413501-1	Evaluation of reaction to fire	ON	Class B, s2, d0
EN13501-2	Fire resistance rating	min	Up to 4 hours of integrity and isolation depending on connector detailing
Eurofins	VOC	ON	Indoor Air Comfort: Gold
	expiration date	months	12

Application benefits

Movement ability: -/+ 50%
Resistance type: Ozone resistance, heat resistance, UV resistance, water resistance
Temperature range: 5 to 40°C

Processing and formulation benefits

Type of curing: Neutral
Number of parts: One
Drying time -50% relative humidity: 90 minutes
Processing time: 15 minutes

Estimation of sealant application requirements.

Linear meters per 310 ml cartridge
Width		6mm	10mm	15mm	20mm	25mm
Depth	10mm	5.2	3.1	2.1	1.0
	15mm		2.1	1.4	1.0	0.8
	20mm		1.6	1.0	0.8	0.6

Durability and Storage

When stored at or below 30°C (86°F) in the original, unopened containers, this product has: a shelf life of 12 months from the date of manufacture.

How to use

Cleaning

Make sure all surfaces are clean, dry, firm and free of frost. Clean all joints to release hydrophobic agents, cement laitance, dust, dirt, old sealants and other contaminants that may impair adhesion. Metal surfaces should be cleaned and degreased by wiping with a suitable solvent using an oil and lint free cloth. For further advice on specific substrate cleaning, please contact Dow Technical Services.
Note: Always ensure adequate ventilation when using any solvent. Avoid heat, sparks and open flames. Follow all precautions listed on the solvent container label or on the Product Safety Data Sheet.
DOWSIL™ FIRESTOP 700(CN) Sealant should not be applied to surfaces below 5°C (41°F) as a dry, frost-free surface cannot be guaranteed at these temperatures.

Adhesion

DOWSIL™ FIRESTOP 700(CN) Sealant has excellent adhesion to most common construction substrates.
Cement or concrete must be primed with DOWSIL™ P Primer for optimum adhesion

Camouflage

Areas adjacent to joints must be masked with tape to prevent contamination of substrates and to ensure a neat sealing line. Masking tape should be removed immediately after processing.