Ambersil Formula 6 Silicone release agent

Name: Ambersil Formula 6 Silicone release agent
Brand: Ambersil
SKU: 31535-AA
Price: 24.9 PLN
Availability: InStock

24,90 zl PLN 27,86 zl PLN Save 2,96 zl PLN

Tax includedShipping calculated at checkout

Only 4 left!

Baza chemiczna: Silikonowa

Cechy szczególne: Dobra wodoodporność, Kompatybilność guma i tworzywa, Właściwości uwalniające do form

Niska temperatura: od -31°C do -50°C

Pojemność opakowania: 400ml

Wysoka temperatura: +151°C do 200°C

Zastosowanie: Smarowanie gumy i elastomerów, Smarowanie tworzyw sztucznych

FORMULA 1/HT High Temperature Silicone Lubricant

Silicone release agent for high temperatures

Separating agent for molding and spinnerets for use in the production of synthetic fibers

Formula 1/HT contains a special formula based on dimethylpolysiloxane fluid with increased resistance to weight loss, change in viscosity and crystallization at temperatures up to 288°C. at this temperature, the product provides resistance to crystallization for up to 5000 hours.

Applications and Use

spinneret lubricant for use in the production of synthetic fibers such as nylon, polyester and polypropylene
release agent for heavy loads
separator for plastic and rubber molds
mold release agent
Compression molding
injection molding
Vacuum forming

Features and Benefits

Automotive Approval: Ford Tox No.: 168735
Provides excellent release properties
It improves the surface finish and does not build up on the mould
increases the efficiency of molds by reducing the amount of rejects
high thermal resistance up to 300°C without crystallization (Formula 1 HT up to +200°C continuously, +300°C short-term)
Contains no chlorinated solvents or ozone depleters.
Easy to use and economical
360° spray system

Technical data

Appearance	Colorless to turbid red-brown liquid
Smell	odorless
Relative density	0.866
Pressure @ 25°C	6 bar
Discharge rate	1.9g/sec
Operating temperature range	up to 288°C in continuous operation, 300°C intermittently
Solubility	Soluble in solvents, insoluble in water
Combustibility	Flammable
Flash-point	Not applicable to sealed aerosol

The table provides guidance on normal lubrication intervals and crystallization-free performance.

POLYMER		temperature resistance	periods *
Polypropylene	230°C - 240°C	250°C	>10,000 GTH
Nylon 6	260°C	260°C	10,000 GTH
Nylon 66	288°C	288°C	>5,000 GTH
polyester	290°C - 300°C	290°C - 300°C **	>200 GTH
* GTH = crystallization time in hours
** For high tenacity products such as industrial yarns or tire cords, sometimes a slightly higher temperature is used in the spinneret area than in the Spin Beam pump area, so the crystallization period will be more limited.
Research method The gel time of the fluids was determined by heating a 3 mm thick layer of fluid in a 40 mm diameter glass vessel at 250°C or 300°C in air.

Durability and storage

The product can be stored at normal ambient temperatures and has a shelf life of not less than 6 years, provided that it is properly stored. Aerosols should always be stored below 50°C, away from direct heat and open flames.