Silicone grease applications
Silicone grease applications - types and principles of proper use
Silicone grease is one of the most versatile technical agents used for protecting, maintaining, and lubricating components made of rubber, plastics, ceramics, glass, and some metals. It is characterized by very good resistance to water, aging, oxidation, and temperature changes. However, it should not be treated as a universal lubricant for every mechanism. The proper selection of silicone grease should consider the material of the lubricated components, operating temperature, movement speed, load, presence of water, hygienic requirements, and method of application.
The phrase "silicone grease application" covers a very broad group of products. This can include light silicone liquid, aerosol preparations, thick sealant paste, valve grease, vacuum system lubricant, or specialized grease for very low or high-temperature operation. Therefore, before purchasing, you should check not only the product name but also its viscosity, consistency class, temperature range, and material compatibility.
What exactly is silicone grease?
Typical silicone grease is formed by thickening silicone oil with a suitably chosen thickener. The base oil is most often polydimethylsiloxane, abbreviated as PDMS. Depending on the product's intended use, silica, lithium, or inorganic thickeners are used, as well as additives to improve oxidation resistance, corrosion protection, adhesion, or sealing properties.
Silicone grease can have the consistency of light oil, gel, petroleum jelly, or a compact paste. A good example of a basic preparation is Standard Silicone Grease, available at sklepsmary.pl. It is a paste obtained by thickening methyl silicone oils with suitable fillers. It has a consistency similar to petroleum jelly, is slightly thixotropic, water-resistant, and exhibits good electrical insulation properties.
Thixotropy means that when squeezed, mixed, or spread, the product becomes more fluid, but when left at rest, it increases its viscosity again. This makes the grease easy to apply to the surface, but it should not flow spontaneously from the application site.
Key properties of silicone greases
The popularity of silicone greases results from a combination of several beneficial features. First and foremost, they tolerate contact with water and moisture well. The grease layer limits water penetration to the contact point, protects the seal from drying out, and can facilitate subsequent disassembly of components.
Another advantage is temperature stability. Depending on the formulation, specialized silicone greases can operate at very low temperatures as well as at temperatures exceeding 150–200°C. However, this does not mean that every silicone product has an identical operating range. A common maintenance paste, high-temperature bearing grease, and valve compound are three different products, even though their base may be silicone oil.
Silicones are also valued for their resistance to oxidation and aging. In many conditions, they do not harden as quickly as typical mineral oil-based agents. They are also often compatible with rubber and numerous plastics. In each case, however, it is worth conducting a compatibility test, especially if the exact type of elastomer is unknown.
An important property is also electrical insulation. Silicone greases can protect electrical connections from moisture, but it is necessary to distinguish between dielectric protection and electrical conductivity. Ordinary silicone grease is not a conductive preparation and should not be applied thoughtlessly directly to contact surfaces that must maintain very low resistance.
Silicone grease – types of available preparations
The phrase silicone grease types can refer to consistency, application method, and product purpose. The simplest division includes silicone oils, spray preparations, plastic pastes and greases, and specialized sealing compounds.
Greases for rubber, O-rings, and seals
This is one of the most important applications of silicone products. Grease reduces friction during assembly, protects the seal edge from curling, protects rubber from drying out, and facilitates proper seating of the O-ring in its groove.
The sklepsmary.pl offer includes, among others, MOLYKOTE 55 O-Ring silicone grease, designed specifically for lubricating rubber O-rings. This preparation can be used wherever good slip, durable protection, and appropriate interaction between the grease and the elastomer are expected. Molykote 55 O-Ring is a technical solution for seals, not an ordinary maintenance paste.
For valves, water installations, taps, fittings, and pressure systems, MOLYKOTE 111 Compound is intended. It is a thick compound based on silicone oil and an inorganic thickener. It is characterized by very good water resistance, high adhesion, and low volatility. It can be used, among others, for lubricating control valves, fittings, gaskets, rubber and plastic O-rings, and installation components exposed to frequent washing.
Molykote 111 is particularly useful in places where ordinary grease would be quickly washed away. The product is also used in outdoor equipment, marine devices, electrical boxes, and installations exposed to harsh environmental conditions.
Greases for plastics and low temperatures
Not every mineral grease is suitable for plastics. Some oils can cause swelling, dullness, brittleness, or surface tension in certain types of plastic. Therefore, in mechanisms with plastic components, appropriately selected silicone greases are often used.
An example is MOLYKOTE 33 Medium. This is a silicone grease with NLGI 2 consistency, characterized by water resistance, oxidation resistance, and good properties at low temperatures. It is intended for lubricating plastic and rubber components and mechanisms that must remain mobile in freezing conditions.
Molykote 33 Medium can be considered for precision mechanisms, guides, control devices, meters, small gears, automotive components, and outdoor equipment. In the case of delicate plastics, material compatibility should always be checked, as the term "plastic" covers many polymers with different properties.
In similar applications, MOLYKOTE 33 Light is used. It has a lighter consistency, so it may work better in mechanisms with lower movement resistance, where too thick a grease would limit operating speed or hinder cold starts.
High-temperature silicone greases
A silicone oil base allows for the design of preparations capable of operating at temperatures where classic mineral greases quickly oxidize, carbonize, or lose their proper consistency.
This group includes MOLYKOTE 41, designed for mechanisms and bearings operating at high temperatures. The product can be used, among others, in heating devices, dryers, conveyors, and furnace cars, provided that the movement and load parameters correspond to its specifications.
Another example is MOLYKOTE 44 Medium, The shop does not stock this grease. used, among others, in fan bearings, dryers, ovens, and equipment whose components are exposed to elevated temperatures for extended periods.
However, it should be remembered that the thermal resistance of grease is not equivalent to its ability to bear very heavy loads. High temperature, high speed, and high pressure are three separate parameters. Grease designed for a hot fan bearing may not be suitable for a heavily loaded bearing in a press.
Greases for vacuum systems
In vacuum installations, very low volatility and low vapor pressure of the lubricant are important. Ordinary oil or improperly selected grease can evaporate, contaminate the chamber, degrade the vacuum achieved, and deposit on equipment.
MOLYKOTE High Vacuum Grease is a specialized silicone grease designed for valves, connections, seals, ground joints, and components of vacuum systems. Its purpose is to simultaneously reduce friction and assist in sealing the connection. The product is used in laboratories, research apparatus, industrial installations, and devices where low volatility of the lubricant is required.
Mold release greases and agents
Silicone is characterized by good anti-adhesive properties. For this reason, silicone oils and greases are used as release agents in molds, during rubber and plastic processing, and in processes where the product must not adhere to the technological surface.
An example of such a preparation is MOLYKOTE 7 Release Compound. The shop does not stock this grease. The product forms a slippery and separating layer that facilitates removing the part from the mold. It can also be used as an auxiliary for lubricating certain seals and plastic components.
Before using a silicone agent in production, however, subsequent process steps must be considered. Silicone remaining on the surface of the part can hinder painting, gluing, printing, or coating application.
Silicone grease in a tube – when is it the best choice?
Silicone grease in a tube usually has the consistency of a paste or thick grease. Such packaging allows for precise dosing of the product directly onto an O-ring, seal, guide, valve, or small mechanism component.
A tube is a good choice for assembly work, fitting service, household appliance repairs, seal maintenance, and lubricating components that can be reached by hand. Thick grease remains at the application site and forms a more durable layer than a light aerosol.
Small packages include Standard Silicone Grease and specialized MOLYKOTE 111. The first may be suitable for basic lubrication and maintenance. The second is an industrial solution primarily intended for valves, seals, O-rings, and installations exposed to water.
When applying grease from a tube, do not overdo the quantity. In many applications, a thin, even layer is sufficient. Excess grease can collect dust, hinder assembly, increase movement resistance, or get into unwanted parts of the device.
Silicone spray grease – advantages and limitations
Silicone spray grease is easy to spread over a large area and reaches places that are difficult to access with a brush or finger. After spraying, it forms a thin, slippery, hydrophobic, and protective layer.
Spray can be used for rubber door and window seals, plastic guides, car equipment components, locks, low-load hinges, roller blinds, garden equipment, and as an anti-adhesive preparation. In industry, it is also used for molds, work tables, guides, and conveying elements.
However, aerosol preparations have less precision than silicone grease in a tube. The mist can settle on adjacent surfaces, the floor, components intended for painting, or materials that are later to be glued. Silicone contamination in a paint shop can lead to the formation of characteristic craters and coating defects.
Before spraying, adjacent components must be protected, adequate ventilation ensured, and information regarding the flammability of the carrier and propellant checked. The layer after solvent evaporation may be colorless, but the aerosol itself often contains flammable substances during application.
Application of silicone grease in the home
In the household, silicone grease is primarily used for rubber seals, valves, guides, and plastic components. It can be used to protect window and door seals from sticking during frost, maintain rubber fittings, lubricate flush mechanisms, valves, water filter O-rings, and garden equipment seals.
The preparation can facilitate the assembly of hoses, O-rings, and press-fit components. However, a small amount should be used, and it should be confirmed that the device manufacturer allows the given type of lubricant.
For devices that come into contact with drinking water, food, or cosmetics, only products with appropriate approvals should be chosen. The mere fact that the grease is silicone does not automatically mean that it is suitable for contact with food or potable water.
Silicone grease in automotive
In cars, silicone grease is mainly used for maintaining rubber door, trunk, and sunroof seals. It reduces rubber freezing, improves slip, and protects against drying out. It can also be used for certain plastic guides, rubber covers, grommets, connectors, and mounting components.
However, it should not be applied directly to steering wheels, pedals, tire treads, drive belts, or surfaces that require high grip. In these areas, slipperiness is a disadvantage, not an advantage.
In automotive applications, particular caution should be exercised with the braking system.
Silicone grease for brakes – can it be used?
The term silicone grease for brakes is sometimes understood too broadly. Ordinary silicone grease should not be applied to brake discs, the friction surface of brake pads, drums, or linings. Any greasing of these surfaces can drastically reduce braking effectiveness.
Special silicone grease can be used in specific areas of the braking system, for example, for rubber seals, some caliper guide pins, or mounting components, but only if the vehicle or component manufacturer permits such a product.
Grease for caliper guides must be resistant to temperature, water, and brake fluid, and compatible with the rubber used in boots and seals. Not every product labeled "silicone" meets these requirements. Therefore, specialized brake grease should not be replaced with ordinary silicone paste intended for household seals.
The rule is simple: friction surfaces must remain perfectly clean and degreased, while lubricants should only be used in technically designated points.
Where not to use silicone grease?
The question of where not to use silicone grease is as important as the question of its advantages. Silicone is not a universal substitute for bearing, gear, copper, ceramic, or graphite grease.
First and foremost, ordinary silicone grease should not be used on the friction surfaces of brakes, clutches, and other mechanisms that need to generate friction. It should not be applied to V-belts, conveyor belts, or gripping surfaces, as it can cause slippage.
It is not a suitable choice for heavily loaded gears, joints, wheel bearings, or slow-moving pins under very high pressure, if the mechanism manufacturer requires grease with EP, MoS₂, graphite, or other solid lubricants. Typical silicone protects rubber and plastics well, but it does not always have sufficient load capacity for heavily loaded metal-to-metal contact.
Silicone grease should also be avoided on surfaces intended for subsequent painting, varnishing, printing, or gluing. Even a trace amount of silicone can weaken adhesive adhesion or cause paint defects.
Caution is needed with electrical connections. Silicone grease can protect the connection from moisture, but it is an insulator. It should not be poured over contact surfaces if the connector design does not provide mechanical penetration of the grease layer and reliable metal-to-metal contact.
It should also not be mixed with any random grease remaining in the device. Different thickeners and base oils may be incompatible. Before changing the type of grease, the mechanism should be thoroughly cleaned, if possible.
How to properly apply silicone grease?
The first step is to clean the surface of dust, old grease, sand, oil, and detergent residues. Contaminants trapped under a layer of new grease can act as an abrasive paste.
For an O-ring or seal, a thin layer spread evenly around the entire circumference is usually sufficient. The component should be moistened with grease, but not coated with it. Excessive amounts do not improve protection and can attract contaminants.
During assembly, use clean gloves, a brush, or an applicator. It is not advisable to put a dirty tool into a large container, as this can contaminate the entire contents.
In the case of a spray product, spray from an appropriate distance and apply several thin layers instead of one very thick one. Excess can be removed with a clean, lint-free cloth.
How to choose the right silicone grease?
First, you need to determine the materials forming the friction pair. A different product will be needed for a rubber O-ring, another for a plastic guide, and yet another for a steel bearing operating in a furnace.
Other parameters include minimum and maximum temperature, movement speed, load, and contact with water, chemicals, vacuum, or food. The appropriate consistency should also be chosen.
For seals and valves, a thick product like MOLYKOTE 111 is suitable. For plastic components operating in freezing temperatures, MOLYKOTE 33 Light or Medium can be considered. For vacuum installations, specialized MOLYKOTE High Vacuum Grease will be needed. For standard maintenance of small rubber and plastic components, basic Standard Silicone Grease may suffice.
When lubricating bearings, rotational speed, bearing diameter, clearance, load, and re-lubrication method must also be considered. The temperature range alone given on the label is not sufficient for proper selection.
Where to buy silicone grease?
Those wondering where to buy silicone grease should pay attention not only to the price but also to the availability of technical parameters, product data sheets, and expert selection. A product sold without information about its chemical base, temperature range, and intended use can be difficult to apply safely.
The online store sklepsmary.pl offers both basic silicone products in small packages and specialized industrial greases from brands such as MOLYKOTE, Rocol, Weicon, and many other manufacturers. The offer includes products for O-rings, seals, valves, plastic components, vacuum installations, and mechanisms operating in low and high temperatures.
Before purchasing, it is worth answering a few questions: what material is to be lubricated, at what temperature does the mechanism operate, is there contact with water, what is the load, and are certificates for drinking water or the food industry required. This allows for choosing a product truly suited to the application, rather than being guided solely by the label "silicone."
Summary
Silicone grease is an excellent solution for rubber, plastics, seals, O-rings, valves, and many mechanisms operating in contact with water or across a wide temperature range. Depending on its formulation, it can act as a lubricant, sealant, electrical insulator, preservative, or release agent.
However, there is no single silicone grease suitable for everything. Silicone grease in a tube provides precise application and a durable layer on seals. Silicone spray makes it easy to cover large surfaces and hard-to-reach areas. Specialized products such as MOLYKOTE 33, MOLYKOTE 55 O-Ring, MOLYKOTE 111, MOLYKOTE 41, MOLYKOTE 44, or MOLYKOTE High Vacuum, meet specific industrial requirements.
The most important thing is to observe limitations. Silicone grease should not be used on the friction surfaces of brakes, clutches, belts, and other components requiring adhesion. It should also not be applied to surfaces intended for painting or gluing, nor should it replace high-pressure greases in heavily loaded nodes.
Properly selected silicone grease can significantly reduce seal wear, facilitate assembly, protect the mechanism from water, and extend its trouble-free operation. Incorrectly selected, it can increase resistance, contaminate the surface, or fail to provide the required protection. Therefore, selection should always begin with the operating conditions, and only then proceed to choosing a specific tube, spray, or industrial package. Below is a table with silicone-based lubricating products that I did not include in the article from the following companies: Ambersil, CT-CARD, CX-8-, DEPAC, EVIL Lubricants, Kema, LOCTITE, Lubrina, Malwa, Normatek, OKS, Pulsar, Silesia, Elkalub.
Product |
Composition |
Application |
|
Molykote 4 Electrical Connector Grease |
NLGI Consistency: NLGI 2 Silicone compounds NLGI 2 temperature: -31°C to -200°C Moisture resistant seals for ignition systems and spark plugs
|
Sealing applications in aircraft, automobiles and ships Battery terminal protection Switches Metal-plastic and metal-rubber connections
|
|
Molykote 7348 High-Temperature Silicone Grease |
Silicone oil; lithium complex thickener; antioxidant; PTFE. |
Long-term lubrication of bearings and mechanisms at high temperatures, in the presence of moisture and oxidation. |
|
Molykote M-77 Silicone Anti-Friction Paste - 1kg |
Silicone oil; solid lubricants, mainly molybdenum disulfide; additives. |
Assembly and protection of metal connections, splines, threads, and sliding surfaces against seizing. |
|
Molykote Separator Spray - Food Grade Silicone Oil NSF H1 400ml |
Silicone oil in an aerosol carrier; NSF H1 approved formulation. |
Anti-adhesion release agent in food production, baking, plastics, and rubber processing. |
|
Molykote PG 21 |
Chemical base: Silicone Lithium complex thickener NLGI 2 operating temperature: -50°C to 190°C |
Electrical, Pumps, Sliding guides, Control cables, Electric motors, Lubrication of rubber and elastomers, Lubrication of plastics, Plain bearings, bushings |
|
MOLYKOTE PG-54 Plastislip Grease
|
White grease based on silicone oil, thickened with lithium complex, with PTFE additive. NLGI class 2–3, operating temperature from approx. –50°C to +180°C. |
For lubricating plastic-to-plastic, plastic-to-metal, and rubber-to-metal connections. Used in guides, bushings, gears, Bowden cables, seals, and automotive mechanisms. |
|
MOLYKOTE G-5021 Grease |
White silicone grease thickened with lithium soap. NLGI class 2, operating temperature from approx. –40°C to +170°C. Water and oxidation resistant. |
|
|
MOLYKOTE® G-5008 Dielectric Grease |
Light grease with silicone base oil and special solid lubricants; wide temperature range, very good dielectric properties; compatible with rubber and ceramics. |
Spark plug boots, electrical connectors, rubber-ceramic and rubber-rubber connections; protection against moisture, corrosion, and electrical breakdown. |
|
MOLYKOTE® G-807 Low-Friction Silicone Compound |
Soft silicone compound modified with PTFE; wide temperature range, low coefficient of friction, good corrosion resistance and compatibility with many plastics and rubbers. |
Lubrication of plastic-to-plastic, plastic-to-metal, and rubber-to-plastic pairs; control mechanisms, guides, seals, and components requiring low actuation forces. |
|
MOLYKOTE® 3451 Chemical Resistant Bearing Grease |
Fluorosilicone grease thickened with PTFE; NLGI approx. 2; operating range approx. –40 to +230°C; high resistance to solvents, chemicals, fuels, and oxidation. |
Bearings, valves, and mechanisms operating in contact with aggressive chemicals, fuels, solvents, or at high temperatures. |
|
MOLYKOTE® 3452 Chemical Resistant Valve Grease |
Fluorosilicone grease with PTFE thickener; high chemical, thermal, and wash-out resistance; typical operating range approx. –40 to +230°C. |
Lubrication and sealing of valves, cocks, regulators, and components of chemical, fuel, and process installations exposed to aggressive media. |
|
NORMATEK Silicone Spray NT1005, 400 ml |
Liquid silicone in aerosol; colorless, forms a thin, invisible, non-staining layer. Waterproof and weather-resistant; antistatic, insulating, and anti-adhesive properties. Operating temperature range approx. –60°C to +200°C. |
Gentle lubrication and maintenance of rubber, plastic, and metal components; automotive seals, hinges, locks, seat belts, and seat rails. Facilitates pulling cables and rubber and plastic profiles; prevents freezing and hardening of seals. |
|
NORMATEK Silicone Release Agent NT1001, 400 ml |
Preparation based on silicones dispersed in a mixture of solvents; aerosol creating a colorless, hydrophobic, and dielectric film. Operating temperature up to approx. +200°C. Does not accumulate in the mold and does not form deposits; according to the safety data sheet, the product is also classified as a lubricant for functional use. |
Lubricant and anti-adhesion agent for low loads; separating parts from molds in plastics and rubber processing. Injection, blow molding, extrusion, and vacuum forming; facilitates demolding of precise components and reduces the number of rejects. |
|
WEICON Silicone Spray Lubricant and Release Agent |
Silicone oil in aerosol; mixture of solvents and propellants. |
Lubrication, maintenance and protection of rubber, plastics, guides, seals and molds. |
|
WEICON Silicone |
liquid, 1–28 l packaging Liquid lubricant and release agent for larger industrial applications. |
It creates a durable release layer on metal, rubber, and plastics, and limits the build-up of adhesives and product adhesion. |
|
WEICON Silicone Fluid |
400 ml aerosol Physiologically safe silicone lubricant and release agent with NSF H1 registration |
. Intended for the food, pharmaceutical, and cosmetic industries; can be used on stainless steel, metal, rubber, and plastics. Temperature resistance is up to approx. +250°C. |
|
WEICON Silicone Grease |
transparent grease. It has NSF H1 registration, approval for drinking water applications, and a temperature range from approximately -50°C to +200°C. |
For valves, fittings, seals, O-rings, rubber and plastic components, machine parts, and slow-rotating bearings |
|
PULSAR AS-4T Silicone Grease with PTFE – paste 20 g, 400 g, 10 kg |
Synthetic silicone grease with PTFE (Teflon) additive; odorless and chemically inert. PTFE enhances lubricating properties and resistance to mechanical and temperature loads. For metal-on-metal, metal-on-plastic, plastic-on-plastic, and rubber pairs; the manufacturer does not publish numerical temperature ranges or NLGI class on the website. |
Precision mechanisms, plastic and metal-plastic gears, silent blocks, seals, brake pistons and cylinders, locks and seals susceptible to freezing, radiators, clamps, water, central heating and gas fittings, household appliances, aquariums, food processing equipment, and cold stores. |
|
PULSAR AS-4T Silicone Grease with PTFE – aerosol 400 ml |
Aerosol version of synthetic silicone grease with PTFE additive. Forms a sliding and protective layer, reduces scuffing and corrosion; intended for metals, rubber, and plastics. Product code KAASMAS4T400;. |
Lubrication of hard-to-reach mechanisms, gears, seals, rubber and plastic components, brake systems, fittings, household appliances, refrigeration equipment, and conveyor lines. |
|
PULSAR AS-9 Silicone Grease – 400 g, 10 kg |
Synthetic silicone grease without PTFE, intended for moderately loaded devices. Prevents scuffing and corrosion; compatible with combinations of metals, plastics, and rubber. |
Precision mechanisms, plastic and metal-plastic gears, silent blocks, seals, brake pistons and cylinders, locks, radiators, clamps, water, central heating, and gas valves and fittings, household appliances, aquariums, food processing equipment, and cold storage components. |
|
PULSAR S-PAS Special Silicone Release Agent – aerosol 600 ml |
Colorless aerosol based mainly on silicone oil suspended in a propellant gas. Creates a clear oil film with release, lubricating, hydrophobic, antistatic, and electrical insulation properties; physicochemically and temperature resistant. |
Injection molds for plastics and rubber, precision mechanisms, knives, guillotine cutters, conveyors and feeders, maintenance of rubber and plastics, refrigerator, freezer, and cold storage components, automotive and window seals. |
|
OKS 1050/0 – Silicone oil 50 cSt |
Silicone oil; viscosity 50 mm²/s at 25°C; density 0.96 g/cm³ at 20°C; operating temperature -55 to +200°C; resistant to water and weather conditions. |
Light lubricant and release agent for plastics and elastomers; molds, rubber profiles, cutting edges in paper and textile industries, eliminating squeaking. |
|
OKS 1010/1 – Silicone oil 100 cSt |
Silicone oil with a viscosity of 100 cSt; forms a very thin lubricating film, exhibits antistatic and release properties; neutral towards many plastics and elastomers. |
Lubrication and release of plastics and rubber, injection and blow molding, window and door profiles, knives, and cutting edges. |
|
OKS 1035/1 – Silicone oil 350 cSt H1 |
Silicone oil; viscosity 350 mm²/s at 25°C; density 0.97 g/cm³; operating temperature -55 to +200°C; NSF H1; MOSH/MOAH free formulation. |
Lubrication and anti-adhesion in plastic and elastomer processing, in paper and packaging machines, and in food applications with incidental contact. |
|
OKS 1050/1 – Silicone oil 500 cSt |
Silicone oil; viscosity 500 mm²/s at 25°C; density 0.97 g/cm³; operating temperature -55 to +200°C; resistant to water and weather conditions. |
More durable lubrication of rubber and plastic surfaces, mold release agent, maintenance, impregnation, and reduction of friction noise. |
|
OKS 1010/2 – Silicone oil 1000 cSt H1 |
Silicone oil; viscosity 1000 mm²/s at 25°C; density 0.97 g/cm³; operating temperature -55 to +200°C; NSF H1; MOSH/MOAH free formulation. |
Lubrication, care, and anti-adhesion for plastic and elastomer components; profiles, molds, paper machines, carton folders, and food processing equipment. |
|
OKS 1020/2 – Silicone oil 2000 cSt |
Silicone oil; viscosity 2000 mm²/s at 25°C; density 0.97 g/cm³; operating temperature -55 to +200°C; high water resistance. |
Thicker lubricating film on plastics and elastomers, mold release, maintenance, impregnation, and lubrication of lightly loaded components. |
|
OKS 1103 – Thermally conductive, electrically insulating paste |
Thermally conductive silicone paste; operating temperature -40 to +180°C; thermal conductivity approx. 0.7 W/(m·K); dielectric strength approx. 19 kV/mm. |
Improved heat dissipation from diodes, transistors, thyristors, sensors, and Peltier elements to heat sinks or metal housings. |
|
OKS 1105 – Insulating paste |
Silicone paste with electrical insulating and hydrophobic properties; operating temperature -40 to +200°C; resistivity approx. 10¹⁴ Ω·cm; dielectric constant 2.75. |
Sealing lubrication of electrical connections, relays, connectors, cable terminals, and lamp holders; protection of insulators against moisture and contamination. |
|
OKS 1110 – Universal silicone grease H1 |
Transparent, highly adhesive grease based on silicone oil and thickener; NSF H1; tasteless and odorless; compatible with EPDM; MOSH/MOAH free formulation. |
Cold and hot water valves, fittings, refrigeration and heating circuits, O-rings, rubber seals, glass stopcocks, and plastic components. |
|
OKS 1111 – Universal silicone grease spray |
Waterproof silicone grease in aerosol; forms an adhesive film on seals and plastics; for application in hard-to-reach areas. |
Lubrication of valves, seals, O-rings, plastic parts, sanitary and heating fittings, and components of cooling systems. |
|
OKS 1112 – Silicone grease for vacuum valves |
Silicone grease with very low vapor pressure; almost constant consistency from -30 to +200°C; does not carbonize or melt; chemically resistant. |
Slides, valves, stopcocks, and ground joints in industrial vacuum installations and laboratory apparatus. |
|
OKS 1133 – Low-temperature silicone grease |
Silicone grease intended for very low temperatures; for bearings and mechanisms operating at medium speeds; limited bearing load to approx. 1/3 of the permissible. |
Electric motors, drives, control devices, telecommunications and navigation equipment, aviation mechanisms, and equipment operating in arctic conditions. |
|
OKS 1140 – Silicone grease for extremely high temperatures |
Temperature-stable silicone grease for slow-moving components; designed beyond the typical operating range of conventional greases. |
Slow-rotating bearings, rollers, conveyor chains, furnace trolleys, baking ovens, drying tunnels, foundries, and heating equipment. |
|
OKS 1144 – Universal silicone grease |
Multi-purpose silicone grease for bearings at varying temperatures and medium speeds; suitable for operating temperatures around +170°C. |
Bearings of turbochargers, hot air fans, hot water pumps, washing machines, dryers, clutches, and plastic-on-plastic sliding pairs. |
|
OKS 1149 – Silicone grease with PTFE |
Silicone grease with PTFE additive; bearing operating temperature -50 to +180°C; for small and medium loads and speeds. |
Long-term lubrication of plastic-on-plastic, plastic-on-metal, and elastomer-on-metal pairs; bearings of electric motors and household appliances. |
|
OKS 1155 – Adhesive silicone grease |
Highly adhesive silicone grease; NLGI 2; base oil viscosity 100 mm²/s at 25°C; operating temperature -65 to +175°C; good sealing properties. |
Metal-plastic-elastomer sliding points at low speeds; O-rings in pneumatic brake systems and connections requiring additional sealing. |
|
OKS 1360 – Silicone release agent |
Lubricating and release agent based on silicone oil; operating temperature -50 to +200°C; waterproof and weather-resistant. |
Molding, injection, blow molding, and extrusion of plastics and elastomers; rubber profiles, reducing adhesive adhesion, and lubricating cutting edges. |
|
OKS 1361 – Silicone release agent spray H1 |
Colorless silicone oil-based aerosol; NSF H1; forms a very thin, antistatic lubricating and release layer; water-resistant. |
Molds for plastics and elastomers, rubber profiles, eliminating squeaking, surface protection and impregnation, and lubricating machine cutting edges. |
|
Ambersil Formuła 6 Silicone Mold Release Agent |
Silicone oil in an aerosol carrier; flow-improving additives. |
Mold release agent for plastics, rubber, and composite processing. |
|
Ambersil Formuła 1/HT High-Temperature Silicone Release Agent |
High-temperature silicone oil; solvents/aerosol carriers. |
Mold separation and adhesion reduction at elevated process temperatures. |
|
JAX Dry-Glide Silicone Food Grade Lubricant 473ml |
Silicone lubricant aerosol; anti-corrosion additives; NSF H1 formulation. |
Dry lubrication of guides, conveyors, plastics, and rubber in food and pharmaceutical facilities. |
|
JAX Silicone Fluid 350 |
pure silicone fluid NSF H1 and 3H; lubricant for incidental contact and release agent for direct contact. Viscosity 350 cSt at 25°C |
. Used on guides, conveyors, sliding surfaces, in packaging production, and as a release agent. |
|
ORAPI SI 4 – Silicone Grease, |
Silicone grease/paste. Temperature range approx. -40°C to +200°C. Water, solvent, and chemical resistant. |
Lubrication and assembly of O-rings, seals, valves, pumps, electrical mechanisms, connectors, battery terminals, and components operating in moisture. Protects against electrolytic corrosion. |
|
ORAPI CTSI |
Low-temperature, dielectric, hydrophobic silicone grease. Non-stick, resistant to water, oxidation, solvents and chemicals. |
For electrical equipment, relays, connectors, antennas, battery terminals, lamp holders, electronic circuits, O-rings, and metal-plastic and metal-elastomer connections. |
|
ORAPI Silicone V300 |
Odorless silicone oil. Operating temperature –50°C to +200°C, and can briefly operate up to approx. +250°C without air access. Chemically inert, hydrophobic, compatible with plastics and elastomers. NSF H1 and INS H1 registrations. |
Lubricant, release agent, separating agent and heat transfer medium. For metal-metal, metal-plastic, wood-metal mechanisms, glass, plastic molds, printing houses, textile, leather, cosmetic and woodworking industries. |
|
ORAPI Silicone Spray |
Aerosol spray based on silicone oil. Colorless, non-stick, hydrophobic, leaves no stains, streaks or sticky residue. Lubrication for light mechanisms and a release agent for molds. |
For metal-metal, metal-plastic, and wood-metal connections, zippers, guillotine blades, door seals, electrical components, the plastics industry, printing, textiles, and woodworking. |
|
ORAPI ESIL 1010 |
Aqueous, odorless, non-flammable silicone emulsion for lubrication and release. Leaves no stains or gummy residue. Effective on metal, plastics, elastomers, paper and wood. |
Release agent for molds and a light sliding agent. For metal-plastic, metal-elastomer components, O-rings, hydraulic and pneumatic systems, and mechanisms requiring a clean, aqueous formulation. (ORAPI CANADA) |
|
ORAPI PEI 35, code 838 |
"Paintable" hydrophobic, non-stick lubricant for plastics. Leaves no stains, streaks, or sticky film. |
For releasing complex molds, plastics processing, printing, screen printing, textiles, leather, woodworking, zippers and cutting machine blades. Allows for subsequent painting or screen printing. |
|
Base: silicone oil; thickener: solid lubricants; base oil viscosity 370 mm²/s; NLGI 1; operating temperature –30 to +180°C; contains solvent for easy spraying. |
Sliding processes, guides, cams, fittings, valves, O-rings and lightly loaded bearings; forms a highly adhesive film after solvent evaporation. |
|
|
ELKALUB GLS 734 – silicone grease |
Base: silicone oil; lithium thickener; viscosity 260 mm²/s; NLGI 1–2; operating temperature –40 to +140°C; special product made to order. |
Universal light lubrication for sliding elements, seals, plastics and elastomers; applications requiring low temperature resistance. |
|
ELKALUB GLS 762/N0 H1 – silicone grease without PTFE |
Fully synthetic silicone oil, thickened with polyurea / inorganic thickener; without PTFE; viscosity approx. 3800 mm²/s; NLGI 0; NSF H1; very resistant to water and steam. |
Centralized lubrication systems, dispensers and progressive distributors; especially rotary distributors in beverage bottling lines; fittings and seals. |
|
ELKALUB GLS 764/N2 – high-temperature silicone grease |
Oxidation-resistant silicone oil, thickened with polyurea; viscosity 80 mm²/s; NLGI 2; operating temperature –40 to +220°C; adhesive and water-resistant. |
Lightly loaded rolling and plain bearings, guides, hinges, joints, rollers and hot air fan bearings. |
|
ELKALUB GLS 794/N1 H1 Halal |
Fully synthetic silicone grease; thickener: solid lubricants/PTFE; viscosity 1000 mm²/s; NLGI 1; operating temperature –40 to +180°C; H1, Halal; resistant to water and steam. |
Fittings, taps, valves, pistons and O-rings in the food, beverage and pharmaceutical industries; does not impair beer foam formation. |
|
ELKALUB GLS 794/N2 H1 Halal |
Fully synthetic silicone grease; NLGI 2; operating temperature –40 to +180°C; H1, Halal; resistant to water and steam; compatible with EPDM, NBR, HNBR and FKM, among others. |
Lubrication and sealing of taps, valves, fittings, pistons and seals; breweries, bottling plants, food and pharmaceutical industries. |
|
ELKALUB GLS 794/N3 H1 Halal |
Silicone oil, thickened with solid lubricants/PTFE; viscosity 1000 mm²/s; NLGI 3; operating temperature –40 to +180°C; H1, Halal; high resistance to water and steam. |
Thicker assembly and sealing version for fittings, valves, taps, pistons and O-rings in the food, beverage and pharmaceutical industries. |
|
ELKALUB GLS 795/N2 – high-load silicone grease |
Silicone base, thickener with solid lubricants/PTFE; viscosity approx. 4500–5000 mm²/s; NLGI 2; operating temperature –40 to +200°C, in hot air up to +120°C; water-resistant. |
Slow-moving rolling and plain bearings, valves, fittings and connections exposed to vibrations; assembly and high-temperature grease. |
|
ELKALUB GLS 795/N3 – high-load silicone grease |
Silicone base, high proportion of solid lubricants/PTFE; viscosity 5000 mm²/s; NLGI 3; operating temperature –40 to +200°C, in hot air up to +120°C; resistant to water and aging. |
Dense grease for slow-moving bearings, valves and fittings; dampens vibrations and supports sliding motion under higher loads. |
|
ELKALUB FLC 700 – silicone spray |
Base: silicone oil; active substance viscosity 22,500 mm²/s at 40°C; operating temperature –50 to +170°C; aerosol with light hydrocarbons and butane; transparent, non-sticky film. |
Long-lasting lubrication and corrosion protection for paper, cardboard, wood, rubber, plastics and fibers; guides, O-rings and sliding surfaces. |
|
ELKALUB FLC 710 – low-viscosity silicone spray |
Base: silicone oil; active substance viscosity 37 mm²/s at 40°C; operating temperature –50 to +170°C; fast-evaporating thin film. |
Indirect spraying during ongoing production; paper, cardboard, wood, rubber, plastics and metal; light lubrication and release action. |
|
ELKALUB FLC 745 H1 Halal – silicone spray |
Base: silicone oil; active substance viscosity 260 mm²/s at 40°C; operating temperature –50 to +170°C; H1 No. 126160; colorless and odorless film. |
Films, plastics, conveyors, rubber rollers, paper and metal in the food industry and for printing food packaging; lubrication, separation and protection. |
|
ELKALUB LFC 7075 – silicone oil |
Chemically neutral silicone oil; viscosity 75 mm²/s at 40°C; operating temperature –55 to +150°C; almost non-flammable, thermally stable and with a high viscosity index. |
Light sliding movements, maintenance and separation of plastics and elastomers; damping, pressure or control fluid; not recommended for steel-on-steel pairings. |
|
ELKALUB LFC 7260 H1 Halal – silicone oil |
NSF H1 and Halal silicone oil; viscosity 260 mm²/s at 40°C; operating temperature –50 to +150°C; chemically neutral, almost non-flammable, thermally stable. |
Light lubrication for valves and sliding elements in the food, beverage and pharmaceutical industries; maintenance, release, damping and control agent. |
|
JAX Dry-Glide® WB |
aqueous silicone spray lubricant |
Intended for guides, slide tracks, rods, bushings, plastics and conveyors, among others. |
|
JAX Dry-Glide® 3H Silicone Release |
silicone aerosol release agent NSF 3H |
release agent, anti-stick and dry lubricant for surfaces |
|
JAX DC Conveyor Release WB / RTU DC Conveyor Release WB |
aqueous silicone emulsion; concentrate version and RTU ready-to-use version NSF 3H |
primarily intended for bakery belts and conveyors, molds, laminating, casting, extrusion, and as an anti-stick agent for tortillas, crackers, biscuits, pizza crusts, and pita bread. |
|
ROCOL ULTIMATE SILICONE Spray |
High-performance silicone aerosol. Operating temperature range: -50°C to +200°C. Mineral oil-free product. |
Forms a colorless, durable, wet lubricating and release layer. With NSF H1 registration, ISO 21469 certification, and DETEX metal-detectable cap. 360° spray system and range up to approximately 80 cm. |
|
ROCOL PRECISION SILICONE Spray |
Colorless, non-toxic silicone lubricant and release agent in aerosol. Temperature range: -50°C to +200°C. Fast-drying. |
Water, oxidation and corrosion resistant. NSF H1 registration, ISO 21469, Halal, Kosher and Vegan certified; PFAS-free formulation. |
|
ROCOL SAPPHIRE Aqua-Sil |
Clear, non-toxic silicone grease with high resistance to water, seawater, chemicals, oils and gases. Operating temperature range: -40°C to +200°C, short-term up to approximately +220°C. |
NSF H1 registration, approval for contact with hot and cold potable water, Halal and Kosher certificates. Not intended for silicone rubber. |
|
ROCOL FOODLUBE Hi-Temp 2 |
White or translucent silicone grease, NLGI 2 class. Temperature range: -20°C to +200°C. NSF H1 registration, ISO 21469, Halal, Kosher and Vegan certified. |
Resistant to water washout, fruit juices, acids, alkalis and cleaning agents. The manufacturer declares MOSH/MOAH-free formulation and NSF 537 PFAS Free certification. |
|
ROCOL PR Spray |
Silicone release agent in aerosol. Temperature resistant up to approximately +200°C. |
Silicone release agent in aerosol. Forms a wet film improving the gloss of finished details. Temperature resistant up to approximately +200°C. The agent thoroughly penetrates even complex mold surfaces. |
|
ROCOL AEROSPEC 533 |
Specialized aviation silicone grease, thickened with lithium complex soap. Temperature range: -73°C to +150°C. |
Resistant to water washout and compatible with most rubbers and plastics, except silicone rubber. Meets DEF STAN 91-56/3, JSD XG 315 and NATO G-394, among others. |
|
ROCOL MX33 |
Low-temperature silicone grease containing molybdenum disulfide MoS₂. Base oil viscosity approximately 36 cSt at 40°C. |
Silicone base, NLGI 1/2 consistency. Meets DTD 900/4630A, AFS 1105 requirements and is listed in Airbus CML documentation. |
|
SI-setral-LI/S3-100 |
Silicone oil-based grease, thickened with lithium complex. NLGI 3 class. Temperature range: -50°C to +200°C. PFAS and TPPT-free. |
Long-term lubrication of components operating at low and high temperatures, in the presence of water and aggressive substances. Especially for automotive applications. |
|
SI-setral-LI/C2-350 |
Silicone grease, complex lithium thickener. NLGI 1–2. Temp. range –45°C to +200°C. Off-white color, non-conductive, resistant to water, steam and oxidation. |
Long-term and lifetime lubrication of metal-to-metal, plastic-to-metal and plastic-to-plastic friction pairs. For power window lifts, sunroofs, seat adjustments and Bowden cables. |
|
SI-setral-LI/C 2 |
Silicone grease with complex lithium thickener. NLGI class 2. Temperature range: –50°C to +220°C, short-term up to approx. +230°C. PFAS and TPPT free. |
Long-term and lifetime lubrication of metal and plastic components operating at very low or high temperatures. Base oil viscosity: approx. 350 mm²/s at 25°C, 270 mm²/s at 40°C. |
|
SI-setral-642 |
Silicone grease with inorganic thickener. NLGI consistency 1–2. Temperature range: –40°C to +200°C. NSF H1 registration. PFAS and TPPT free. |
Lubrication and sealing of joints, O-rings, control and reduction valves. Can be used as assembly lubricant for pulling cables in plastic conduits through cable ducts. Base oil viscosity: approx. 700 mm²/s at 25°C, 500 mm²/s at 40°C. |
|
SI-setral-1041/FD |
Adhesive silicone grease with inorganic thickener. NLGI class 2–3. Temperature range: –30°C to +200°C. NSF H1 registration. PFAS and TPPT free. |
Assembly, lubrication and sealing of plug connections and O-rings made of rubber and plastics. For waterproof electrical connections, terminals and electrical system components. Base oil viscosity: approx. 5000 mm²/s at 25°C, 3500 mm²/s at 40°C. |
|
SI-setral-L 50 |
Silicone grease with inorganic thickener and white solid lubricants. Base oil viscosity: approx. 150 mm²/s at 25°C, 95 mm²/s at 40°C. NLGI class 2. Temperature range: –50°C to +200°C. PFAS and TPPT free. Base oil viscosity: approx. 150 mm²/s at 25°C, 95 mm²/s at 40°C. |
Lubrication of rolling and plain bearings and metal-to-metal and metal-to-plastic friction pairs. For mounting metal-rubber connections in the textile, paper, wood, food and pharmaceutical industries. |
|
SI-setral-929/FD |
Silicone grease with inorganic thickener and white solid lubricants. NLGI class 3. Temperature range: –50°C to +200°C. NSF H1 registration. PFAS and TPPT free. |
Lubrication of fittings, valves and EPDM seals, especially in the beverage and brewing industry. Also as assembly grease for metal-to-plastic and metal-to-rubber connections. Base oil viscosity: approx. 1000 mm²/s at 25°C, 750 mm²/s at 40°C. |
|
SI-setral-5 X and SI-setral-5 X Spray |
Synthetic, transparent silicone oil. Temperature range: –40°C to +200°C. NSF H1 registration. Available as liquid and aerosol. PFAS and TPPT free. |
Lubrication and separation of plastic-to-plastic and plastic-to-metal pairs. For knives in corrugated cardboard production, assembly of O-rings and seals, and demolding of rubber and plastic components. Viscosity: approx. 350 mm²/s at 25°C, 275 mm²/s at 40°C. |
|
Setral MULTI SILI Spray |
Fast-drying silicone oil-based lubricating fluid. Colorless. NSF H1 registration no. 161387, production certified according to ISO 21469, FDA 21 CFR 178.3570, Kosher and Halal requirements. |
Lubrication of rubber and plastic components in packaging and labeling machines, food, pharmaceutical and automotive industries. For seatbelts, rubber seals and metal-to-rubber connections. Reduces electrostatic charges. Temperature range: –40°C to +150°C. |
|
SI-setral-HSC/N |
Silicone thermal paste with inorganic thickener. NLGI consistency 1–2. Chemically inert and compatible with many plastics. PFAS and TPPT free. |
Heat dissipation between electronic components and cooling surfaces. For heat sinks, power modules, sensors, electrical components and high-temperature systems. Temperature range: –40°C to +300°C. |
|
CX80 SILICONE SPRAY |
Colorless silicone lubricant in aerosol for rubber and plastics. Temperature range from -60°C to +230°C; non-stick properties; does not stain and does not bind dust; NSF H1 approved. |
For seals, O-rings, valves, connectors, joints, guides, cables, locks, hinges and electrical components. Also for the food, textile, paper and automotive industries. |
|
CX80 SILICONE GREASE |
Colorless silicone-based grease. NLGI class 2; operating temperature from -60°C to +230°C; resistant to water and acids; metal-free; NSF H1 approved. |
For lubricating seals, O-rings, valves, connectors, taps, joints, cables, locks, hinges, bushings and screws. For the food, paper, textile and automotive industries. |
|
Ambersil Silicone Lubricant |
Colorless, odorless silicone aerosol lubricant. Operating range from -50°C to +200°C; non-staining; non-toxic; |
For lubricating plastic-to-plastic, guides, chutes, tables, conveyors, blades and guillotine knives. Also as a release agent for molds. WRAS 1310510 approval for drinking water installations. |
|
Ambersil Silicone FG |
Blend of stable silicone oils in aerosol. Colorless, non-corrosive and highly hydrophobic; NSF H1 registration. |
For lubricating metal, plastics, rubber, nylon and wood in the food industry. For seals, locks, guides, springs, pulleys and as a release agent. |
|
Ambersil Ambergrease SIL |
Pure, transparent NLGI 2 silicone grease. Operating range from -50°C to +220°C; dielectric strength. |
For lubricating electric motor spindles, protecting electronics from moisture, and sealing and protecting electrical systems. |
|
Ambersil AMS4 Silicone Grease |
Military and aerospace silicone grease, XG250 class. Waterproof, dielectric; |
For rubber seals, three-phase connectors, moisture protection, and insulating high-voltage components from current leakage and arcing. |
|
Ambersil Formula 1 |
Silicone release agent. Colorless liquid; operating temperature up to +200°C, HT version up to +300°C; density approx. 0.769 g/cm³. |
For difficult demolding of plastics and rubber in injection molding, compression molding and thermoforming processes. Also as a non-stick agent in textiles, printing and foam processing. |
|
Ambersil Formula 2 |
Specialized silicone release agent for rubber. Creates a wet film; operating temperature up to +200°C; density approx. 0.81 g/cm³. |
For rapid demolding of natural rubber and lower melting point polymer products, especially in the tire industry. |
|
Ambersil Formula Six |
General-purpose medium-strength silicone release agent. Colorless; operating temperature up to +200°C; 360° spray system; density approx. 0.723 g/cm³. |
For injection molding, compression molding and thermoforming of thermoplastics and many rubbers. Improves part surface and reduces sticking. |
|
Ambersil PUR 400 |
Silicone release agent for polyurethanes. Colorless, fast-evaporating, low odor; operating temperature up to +200°C; density approx. 0.762 g/cm³. |
For demolding integral and elastomeric polyurethanes. Provides a smooth, glossy surface and does not build up on the mold. |
|
RHEA MOULD Release Agent With Silicone |
Silicone mold release agent. Creates an anti-adhesive layer that facilitates the separation of parts from the mold surface; intended for industrial applications. |
For injection molds and plastic and rubber processing. Facilitates demolding of parts and reduces their sticking to molds. |
|
RHEA ANTI-adhesion Expert (with silicone) |
Anti-adhesive agent with silicone additive, designed for high-temperature work. Process product for molding and separating parts. |
For injection molding machines, plastic and rubber molding, especially rotomolding. Prevents sticking and facilitates clean separation of finished elements.
|
|
EVIL Lubricants SILK Standard |
Silicone paste obtained by thickening methyl silicone oils with fillers; no solid particles. Vaseline-like consistency, slightly thixotropic; insulating, waterproof and anti-corrosion properties. |
For lubricating rubber, elastomers, seals, O-rings, valves, cables, doors and windows, and light mechanisms in industry, automotive and household use. |
|
EVIL Lubricants SILK Premium |
Thick silicone grease with low volatility and low vapor pressure. Forms an impermeable layer resistant to water and chemicals; protects against sticking and loss of elasticity. |
For O-rings, ball valves, pipes, seals, coffee machines, treadmills, bicycle and car mechanisms, and components made of rubber, wood and metal. |
|
EVIL Lubricants Dielectric Grease |
Silicone grease with dielectric and sealing properties. Resistant to high voltage; forms a hydrophobic protective layer. |
For high-voltage connections, ignition wires, connectors, rubber plugs, electrical fittings and seals exposed to moisture. |
|
EVIL Lubricants SILK OIL 10 cSt |
Transparent, colorless and odorless PDMS silicone oil with a viscosity of 10 cSt. Good dielectric and hydrophobic properties; compatible with rubber and plastics. |
For light lubrication of rubber, elastomers and plastics, as a mold release agent, fluid for HYDRO MOD watches, additive to paints, and in the cosmetic and food industries. |
|
EVIL Lubricants SILK OIL 100 cSt |
Colorless silicone oil with a viscosity of 100 cSt. High lubricity, low surface tension, good dielectric and hydrophobic properties, and thermal resistance. |
For lubricating plastics, rubber and light mechanisms, as an anti-adhesive, care, insulating agent, and as a component of cosmetic and technical formulations. |
|
EVIL Lubricants SILK LUBE |
Blend of synthetic and silicone oils with anti-corrosion and load-carrying additives; also described in commercial versions as a polyester-silicone formulation with PTFE. Low friction coefficient. |
Bicycle chain oil for dry and slightly damp conditions. Reduces dust adhesion, repels water, quiets the drivetrain and protects against corrosion. |
|
EVIL Lubricants FORK GREASE |
Waterproof silicone grease, NLGI 2 class. Temperature range from -60°C to +200°C; resistant to oxidation, moisture, atmospheric factors and water washout. |
For seals, O-rings and bushings in bicycle shock absorbers and metal-rubber, metal-plastic and plastic-plastic pairs. |
|
EVIL Lubricants CABLING |
High-quality silicone mixture for Bowden cables. The manufacturer does not publicly provide detailed viscosity or temperature range. |
For lubricating Bowden cables and casings in bicycles, motorcycles, and light control mechanisms; reduces friction and protects against moisture. |
|
EVIL Lubricants VOLT LUBE |
Synthetic chain oil containing hybrid and silicone compounds, dispersions of solid lubricants, EP additives, corrosion inhibitors, and adhesion-improving components. |
For heavily loaded e-bike chains. Reduces friction and wear, silences operation, protects against water, and does not attract excessive dust. |
|
KEMA SC-4 Silicone Spray |
Pure silicone grease-based preparation. Colorless and odorless; operating range from -50°C to +200°C; resistant to moisture and heat; protects against corrosion. Product for professional and industrial use. |
For lubricating plastic bearings, nylon wheels, hinges, rubber rollers, seals, drive belts, contacts, and ignition systems. Protects rubber from aging and freezing. |
|
KEMA SC-4 Silicone Grease |
Light, translucent silicone grease with very good dielectric properties. Operating range from -50°C to +200°C; mass loss due to evaporation below 2% after 24h at 200°C; resistant to moisture, aging, and corrosion. |
For metal, ceramics, rubber, PVC, and electrical insulation materials. Used for O-rings, seals, insulators, electrical connectors, rubber and plastic components, and as protection against water and corrosion. |
|
KEMA KEMSIL 350 cSt Silicone Oil |
Pure silicone oil – dimethylpolysiloxane with linear structure. Viscosity 350 cSt; very good thermal stability and electrical properties; low surface tension, small viscosity change with temperature, and good oxidation resistance. |
As a slip, lubricating, and release agent between elastomers and on plastic and metal surfaces. Also as a dielectric fluid and additive in industrial formulations. |
|
Colorless, low-viscosity silicone oil in aerosol; propane/butane propellant; continuous operation approx. -30 to +150°C, temporarily up to +250°C after evaporation. |
Lubrication of metal and plastics, guides, conveyors, cutting knives, and plastic parts; release agent for molds. |
|
|
LOCTITE LB 8104 |
Colorless silicone oil-based grease with inorganic thickener; NLGI 2/3 consistency; temperature up to approx. 200°C. |
Lubrication of plastics and elastomers, valves, fittings, and O-rings in hot and cold water installations and food industry equipment. |
|
LOCTITE LB 8801 |
Silicone grease with high resistance to water, aqueous solutions, alcohols, and mineral and vegetable oils. |
Lubrication, sealing, moisture protection, and insulation of metal, rubber, and plastics; valves, taps, O-rings, and electrical contacts. |
|
Silicone Grease Type A |
Semi-fluid, slightly thixotropic silicone gel; colorless, translucent; NLGI 0; penetration 320–370 (0.1 mm); operating temperature from -40°C to +250°C; ingredient compliance with FDA requirements for NSF H1 category. |
Lubrication, sealing, and separation; laboratory applications, electronics, and telecommunications; easy application to components requiring a thin layer of grease. |
|
Silicone Grease Type C |
Medium-hard, slightly thixotropic silicone paste; NLGI 3–4; penetration 170–230; density approx. 1.03 g/cm³; operating temperature from -40°C to +250°C; for high vacuum 10–0.01 mmHg; dielectric strength 19 kV/mm; FDA/NSF H1. |
Sealing of high vacuum apparatus; lubrication, insulation, assistance with assembly and friction, and vibration damping. |
|
Silicone Grease Type D |
Hard silicone paste for ultra-high vacuum; NLGI 4; penetration 160–210; density approx. 1.04 g/cm³; operating temperature from -40°C to +250°C; operation below 0.01 mmHg; dielectric strength 19 kV/mm; FDA/NSF H1. |
Sealing ultra-high vacuum apparatus, lubrication, and release action in laboratories and vacuum equipment. |
|
Silicone Gel H |
Colorless, translucent silicone gel; NLGI 2; penetration 230–270; density approx. 1.02 g/cm³; operating temperature from -40°C to +210°C; resistant to water, acids, and bases; high electrical resistance; FDA/NSF H1. |
Telecommunications, electronics, printing, and plastics processing; electrical insulation, protection against water and corrosion, and operation in dispensing machines. |
|
Silicone Grease in aerosol |
Colorless, odorless, and neutral silicone grease in 400 ml aerosol; operating temperature from -50°C to +210°C; resistant to water, ethanol, acetone, acids, and bases, among others; non-conductive. |
Lubrication of lightly and moderately loaded metal-rubber, metal-plastic, rubber-rubber, and plastic-plastic pairs; maintenance of automotive seals, rubber, leather, and plastics; electronics and telecommunications. |
|
Atepo SIL |
Universal silicone release agent in 400 ml aerosol; mixture of colorless silicone oils. |
Injection molds, foil welding machines, needles and blades, iron soles, and locks; lubrication of light plastic-plastic, rubber-plastic, and plastic-metal pairs; anti-static action. |
|
Lubrina Kalandrol 200 |
Colorless silicone release agent in 400 ml aerosol; mixture of silicone oils. |
Reducing adhesion of LDPE, HDPE, PP, ABS, resins, rubber, polyamides, PS, and PVC to molds; lubrication of moderately loaded components, knives, needles, welding machines, and plastic surfaces. |
|
Lubrina Kalandrol 220 |
Colorless, ecological silicone release agent in 400 ml aerosol; the manufacturer does not publicly provide the exact composition or numerical parameters. |
Protection of surfaces against adhesion of paints, varnishes, plastics, and various types of dirt; printing, automotive, and plastics processing. |
|
Dry Silicone |
Colorless silicone release agent in 400 ml aerosol; the manufacturer does not publicly provide the exact composition or numerical parameters. |
Screen printing: preventing adhesion of paints and varnishes and clogging of screens; facilitating printing and cleaning, protection, and extending screen life. |
|
Silicone oil for oil baths |
Colorless, transparent, and odorless silicone oil; density approx. 0.97 g/cm³; operating temperature from -50°C to +150°C in an open system and up to +250°C in a closed one; flash point >300°C; low vapor pressure. |
Heating and thermostatic medium in laboratory oil baths; applications requiring thermo-oxidative stability and a wide temperature range. |
|
Silicone oil for cryostatic baths |
Composition of silicone oils with low freezing point; colorless liquid; density 0.89–0.93 g/cm³; operating temperature from -55°C to +100°C; flash point >120°C. |
Working medium in laboratory cryostatic baths and thermostatic systems operating at low temperatures. |
|
MALWA Silicone Grease with dispenser 70/80 ml |
Colorless, odorless silicone-based lubricating mass; high viscosity and adhesion; does not run off vertical surfaces; resistant to aging, moisture, and corrosion; applicator approx. 3.5 cm. |
Lubrication and maintenance of rubber, plastics, and metal; seals, guides, joints, hinges, screws, friction elements, and hard-to-reach places. |
|
AVIA Silicone Grease 500 g |
Fully synthetic silicone grease, thickened with silica; NLGI class 1; non-melting; operating temperature range from -60°C to +220°C; colorless, odorless, and chemically inert. NSF H1 certificate no. 172857 – approved for incidental food contact. |
Lubrication and protection of metal, plastic, rubber, ceramic, and glass components. Food industry, fittings, seals, light mechanisms, locks, and areas exposed to moisture and water washout. Reduces friction, protects against corrosion and freezing. |
|
AVIA Silicon Spray 400 ml |
Colorless and odorless silicone lubricating and preserving agent in aerosol; capacity 400 ml; 360° valve. Operating temperature range from -50°C to +200°C. |
Maintenance and light lubrication of seals and plastic and rubber components. Eliminates squeaks and creaks, increases material flexibility, provides shine, and creates a protective layer. |
